Split Package Pricing - TEC MA-1535-2 series Owner's Manual

9. REGISTERING PROCEDURE AND PRINT FORMAT
9.17

Split Package Pricing

The HI-CONE status can be programmed to each of Split-Price PLUs. And each department can be
programmed with the status "Split Package Pricing entry is available".
If so programmed, the operation patterns for one item entry are as follows.
OPERATION
(1) PLU
|Purchased Q'ty| [SPLIT PRICE]
|Whole Package Price| [PRICE]
(See NOTE2 below.)
(2) Department
|Purchased Q'ty| [SPLIT PRICE]
NOTES: 1. The Split Package Pricing entry is available only for the HI-CONE PLUs and the departments
programmed with the status "Split Package Pricing entry is available".
2. Values entered through the keys are prior to the Preset Individual Item Price and the Whole
Package Quantity which were programmed.
3. With Split-package Individual Item Price setting, "Whole Package Price / Whole Package
Quantity" will be calculated by the Whole Package Quantity entry, causing the quotient to be
Individual Item Price.
4. With M & M function, calculation will be performed using Accumulated Purchased Quantity, the
latest Whole Package Quantity, and the latest Whole Package Price. (only for the PLU entry)
5. The Repeat Entry is unavailable in this operation.
6. This operation cannot be applied to the HASH and NEGATIVE departments.
7. This operation cannot be applied to the departments programmed with any of the coupon,
gasoline, scale, or tare status.
|Whole Package Q'ty| [SPLIT PRICE]
(See NOTES2, 3 below.)
|Split-Price Type PLU Code| [PLU]
[PLU Preset-code Key]
Barcode scanning
|Whole Package Q'ty| [SPLIT PRICE]
(See NOTES2, 3 below.)
|Whole Package Price| [Open DEPT]
|Whole Package Price| [DEPT SHIFT] [Open DEPT]
[Preset DEPT]
[DEPT SHIFT] [Preset DEPT]
9-15
EO1-11149
9.17 Split Package Pricing