Minolta PagePro 1200 Series Service Manual page 80

PagePro 1200 Series Maintenance / Disassembly
(15) Removal of the Power Unit and High Voltage Board
1. Remove the Right Cover, Left Cover, Top Cover, Rear Cover, and Fusing Unit.
2. Unplug the connectors (PJ7 and PJ13) from the Controller Board and remove the harness from
the cord holder.
3. Remove the Power Unit Assy (six screws).
4. Unplug the connectors (CN1 and CN3) from the Power Unit Assy and remove the harness from
the cord holder.
5. Remove the Power Unit (four screws).
6. Remove the High Voltage Unit (one screw).
7. Remove the Cooling Fan Motor (two screws).
Cooling Fan Motor
Power Unit
(PU1)
High Voltage Unit (HV1)
80
4127s052
4127s107