Minolta PagePro 1200 Series Service Manual page 73

(9) Replacement of the Paper Take-up Roller
1. Remove the Right Cover, Left Cover, Paper Separator Unit, and Front Cover.
2. Place the printer with its backside down.
3. Unhook the spring and remove the right-hand side of the Paper Take-up Roller shaft from its
bushing.
4. Remove the Paper Take-up Roller.
(10) Removal of the Print Head unit
1. Remove the Right Cover, Left Cover, Paper Separator Unit, and Front Cover.
2. Unplug the connector (CN1) from the Main Motor Assy and remove the harness from the cord
holder.
3. Unplug the connectors (PJ5, PJ6, and PJ9) from PWB-P and remove the harness from the cord
holder.
Special note for the PagePro 1250E: When removing PJ6, first remove the core, and then
remove the harness from the cord holder.
4. Remove the Print Head Unit (PH) (six screws).
(c)
Main Motor Assy
PagePro 1200 Series Maintenance / Disassembly
4127s040
(a)
(b)
73
4127s105