Minolta PagePro 1200 Series Service Manual page 68

PagePro 1200 Series Maintenance / Disassembly
(3) Replacing the Image Transfer Roller
1. Swing down to the front the levers of the right and left bushings (white) on the Image Transfer
Roller and remove the Image Transfer Roller from the Image Transfer Roller Holder.
NOTES
• Never touch the surface of the Image Transfer Roller or contaminate it with chemicals or toner. A
depression or contamination on the roller will adversely affect print quality.
• When handling the Image Transfer Roller, hold it by the shaft or bushings.
2. Remove the bushings and gears from both ends of the Image Transfer Roller and fit them to the
new Image Transfer Roller.
3. Insert the Image Transfer Roller in the Image Transfer Roller Holder and swing the levers of the
bushings up to the rear.
4127s030
4127s031
68
4127s032