Minolta PagePro 1200 Series Service Manual page 79

PagePro 1200 Series Maintenance / Disassembly
11. Remove the Fusing Paper Separators (at four places).
12. Remove the Thermistor (one screw).
NOTE
• Route the harness as shown in Fig. 1 when reinstalling the Thermistor.
13. Remove the Thermostat (two screws).
Thermostat
(TS1)
Thermistor
(TH1)
Fig. 1. Backside of Fusing Unit
4121s077
4127s051
Harness
79