Server operations
Power up the server
To power up the server, press the Power On/Standby button.
Power down the server
WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
IMPORTANT:
Back up the server data.
1.
Shut down the operating system as directed by the operating system documentation.
2.
Press the Power On/Standby button to place the server in standby mode. When the server activates
3.
standby power mode, the system power LED changes to amber.
Disconnect the power cords.
4.
The system is now without power.
To reduce the risk of personal injury, electric shock, or damage to the equipment,
If installing a hot-plug device, it is not necessary to power down the server.
Server operations 6