and components used as part of the secondary domestic water system
must be approved for use with potable water supplies.
This is to certify that the above ranges of products manufactured by
Bosch Thermotechnology have been tested and found to comply with:
• the requirements of the (Water Fittings) Regulations 1999 for
England and Wales, the Water Byelaws 2000, Scotland and the Water
Regulations Northern Ireland.
• the requirements of the UK Building Regulations:
The Building Regulations 1991 (England & Wales) Requirements G3, L1
and Regulation 7.
The Building Standards (Scotland) Regulations 1990. Regulation 10
(B2), 22 (J3.3a and J3.4), 27 and 28 (P2.6 and P3).
The Building Regulations (Northern Ireland) 2000.
In accordance with current EU legislation (the F-gas regulation, EC
Regulation No 842/2006 which came into effect on 4 July 2006), a
heat pump that contains more than 3 kg of refrigerant R410A must be
checked regularly by an accredited technician.
6
STANDARD DELIVERY
Fig. 1
[1]
x1, Heat pump
[2]
x1, Flow sensor
[3]
x4, Adjustable feet
[4]
x1, Outdoor sensor
[5]
x1, Document set
[6]
x1, Particle filter (R 3/4 inner thread) for heating system (6 - 11
Combi). Particle filter is integrated in the System model.
6 720 806 768 (2013/02)
2
1
5
8
9
11
[7]
x1, Drain plug
[8]
x1, Ball valve
[9]
x1, Safety valve (4 bar)
[10] x1, Expansion vessel
[11] x1, Filling unit DN25 6-11 Combi, 6-11 System
STANDARD DELIVERY
3
4
6
7
10
6 720 802 421-03.1I
5