Table of Contents
Advertisement
2
Product Information
Intended use
These instructions cover the following flue accessories kits:
• 7 733 600 298 Room Sealed horizontal fixed flue
• 7 716 191 086 Plume management system
These 60/100mm flue kit accessories are intended for use with
Worcester Greenstar wall mounted condensing gas appliances.
The flue adaptor elbow has an in-built 3° angle giving the flue assembly
the rise from the appliance to ensure the condensate flows back to the
appliance. The flue terminal plume re-direct allows to change the
discharge direction of the plume exhaust. The terminal plume redirect
can also be replaced with the plume management system to discharge
away from the property to a more suitable location.
2.1
Standard package
• 60/100mm Horizontal fixed flue kit:
– Part No.: 7 733 600 298
Fig. 3
Standard package contents
[1]
Instructions
[2]
Fixed flue assembly
• Inner seal (white)
• Outer seal (black)
• Elbow
• Fixed length flue (1,000mm)
[3]
Grease pack
• Securing screws x 2
• Sachet of grease
Greenstar Condensfit II – 6 720 874 391 (2019/04)
2.2
60/100mm flue accessories
1 High level horizontal flue adaptor *
2 220mm extension
3 1,000mm extension
4 2,000mm extension
5 90° elbow
6 45° elbow (set of 2)
7 Support bracket kit
8 Support bracket kit (set of 6)
Table 2
* High level horizontal flue adaptor is required when connecting the
horizontal flue kit for higher level flue discharge compared to the
standard 90° adaptor turret.
1
2
3
0010014890-001
Fig. 4
Accessories
Product Information
7 719 002 432
7 716 191 133
7 716 191 083
7 716 191 172
7 716 191 084
7 716 191 085
7 716 191 177
7 716 191 178
1
2
3
4
5
6
7
8
x 6
0010013464-001
5
Advertisement
Table of Contents
