Table of Contents
Advertisement
Projector Distance
On the screen, a drawing (Projection distance 1 Menu) will be displayed together with parameters indicating a correct position.
PROJECTOR DISTANCE
PROJECTOR DISTANCE 1
$
"
6:
PD/ SW/ A
(;,7
"
7(;7
PROJECTOR DISTANCE 2
(;,7
"
Flowchart 2
To change the screen width (see flowchart above) :
Push the cursor key ç or è to highlight the item SW in the "Projector distance 1" menu and then press TEXT. If ENTER
1
is pressed, the "Optical Lens Focusing" will be displayed.
If EXIT is pressed, the projector will return to the previous menu.
2
After TEXT is pressed, the next menu "Projector distance 2" will be displayed on the screen. It allows the user to change
the Screen width.
Push the cursor key ç or è to highlight the digit needed to be changed, and enter the desired digit with the numeric
3
keys on the RCU or the local keypad.
4
Press ENTER to confirm the changes. The projector will redisplay the "Projector distance 1" menu with updated values
for the three parameters.
5
Press ENTER to continue with the "Optical Lens Focusing".
If EXIT is pressed, the projector will return to the previous menu.
The same applies to the PD (projector distance). You can use the above-mentioned procedure to obtain a correct updated
value of SW (screenwidth) after entering a new value of PD (projector distance).
5976195 BARCOCINE 9 31012002
3'
(17(5
(17(5
OPTICAL LENS FOCUSING
FHLOLQJ
%
3'
VFUHHQ
A = C o r r e c t io n v a lu e
P D = P e r p e n d ic u la r d is ta n c e b e t w e e n s c r e e n a n d
p r o je c t o r
S W = S c r e e n w i d t h
PD=3.64m
6: P
Select with arrow keys; <TEXT> to reprogram
<ENTER> to continue; <EXIT> to return.
WARNING: ONLY FOR STANDARD PROJECTORS!!
Projection distance 1 Menu
2
SCREENWIDTH =
2
Select with arrow keys; reprogram with numeric keys and
then <ENTER> to confirm.
Maximum screenwidth = 6 m
Maximum proj. distance = 8,1 m.
Projection distance 2 Menu
Installation Adjustment Mode
$
SURMHFWRU
A=12cm
, 6 0 m
7-3
Advertisement
Table of Contents
