Connecting A Rgb Analog Source With Tri-Level Sync To Port 4/5.(Option); Connecting A Component Video Source To Port 4/5; Connecting A Component Video Source With Tri-Level Sync To Port 4/5.(Opion) - Barco R9000972 Owner's Manual

Connecting a RGB Analog source with Tri-level
sync to port 4/5.
(option)
RGB analog input terminals with Tri level sync input or
with Tri-level sync on green.
automatically where the sync signal is located.
RGB input selection :
(RG3sB : R, G, B signals with automatic Tri-level sync detection)
with the RCU or the build in RCU : press digit button 7
Connecting a Component Video source to
port 4/5.
A component video (R-Y, Y, B-Y) with sync signals can be connected
to the projector via the Port 4/5. The projector detects automatically
where the sync signal is located.
To select the component video input :
with the RCU or the build in RCU : press digit button 6.
Connecting a Component Video source with Tri-
level sync to port 4/5.
(Opion)
A component video (R-Y, Y, B-Y) with Tri-level sync signals can be
connected to the projector via the Port 4/5. The projector detects
automatically where the sync signal is located.
To select the component video input :
with the RCU or the build in RCU : press digit button 8.
5975628 BARCOGRAPHICS 1209S 010797
The projector detects
PORT 4/5
(RGB - HV)
Comp/H sync V sync
PORT 6
REMOTE PORT 3
COMMUNICATION
R G
VCR HDTV player
PORT 4/5
(RGB - HV)
Comp/H sync V sync
PORT 6
REMOTE PORT 3
COMMUNICATION
R G
VCR HDTV player
PORT 4/5
(RGB - HV)
Comp/H sync V sync
PORT 6
REMOTE
PORT 3
COMMUNICATION
R
G
VCR HDTV player
Connections
PORT 1
PROJECTOR MODE
(VIDEO)
GREEN : operational
RED : stand-by
PORT 2
(S-VIDEO)
OFF ON OFF ON
75 ohm
75 ohm
B
Audio amplifier
PORT 1
PROJECTOR MODE
(VIDEO)
GREEN : operational
RED : stand-by
PORT 2
(S-VIDEO)
ON
OFF ON OFF
75 ohm
75 ohm
B
Audio amplifier
PORT 1
PROJECTOR MODE
(VIDEO)
GREEN : operational
RED : stand-by
PORT 2
(S-VIDEO)
OFF ON OFF ON
75 ohm
75 ohm
B
Audio amplifier
POWER/MAINS
359
POWER/MAINS
359
POWER/MAINS
359
3-5