Control Panel Terminology; The Local Keypad; Rcu Control Panel Terminology - Barco R9002031 Owner's Manual

Location and Functions of Control

Control panel terminology

GRAPHICS
1
ADJ EXIT
2
3
ENTER
4
STBY PAUSE TEXT
5
+
0 -
9
SHARPNESS
7 - +
8
6
TINT
5 6 - +
COLOR
3 4
- +
BRIGHTNESS
1 2
+
-
CONTRAST
9
ENTER : To start up the adjustment mode or to confirm an
adjustment or selection in the adjustment mode.
10
EXIT : To leave the adjustment mode or to scroll upwards
when in the adjustment mode.
2-2
12
stand-by
11
10 pause/park
9
sharpness
8
tint
color
7
brightness
contrast
32c
a. The Local Keypad
Gaining Access
The local keypad is located underneath the top cover door with the
BARCO logo.
To open this door, push as indicated on drawing and turn it to the front
side of the projector.
This local keyboard has the same functions as the Remote Control
Unit (RCU).
b. RCU control panel terminology
This remote control includes a battery powered infrared (IR) transmit-
ter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation
and set-up. It includes automatic storing of :
- Picture controls (Brightness, Sharpness,....)
- Picture geometry adjustments
- Convergence adjustments
Other functions of the remote control are:
- Switching between standby and operational modes
- Switching to "pause" (blanked picture, full power for immediate
restarting)
- Direct access to all connected sources
- Variable adjustment speed : when pushing continuously on the
control stick or the picture keys, the adjustment will be executed in
an accelerated fashion.
Back light key : When activated, all keys will be lit up and
1
visible in the dark.
2 ADJ. : Adjust key, to enter or exit the adjustment mode.
Address key (recessed key), to enter the address of the
3
projector (between 0 and 9). Press the address key, followed
by pressing one digit button between 0 and 9.
STBY : Stand-by button :
4
- to initiate remote power up operation
- to stop projection without main power off.
Pause : To blank the image, press PAUSE. The image
5
disappears but full power is retained for immediate restart-
ing.
6
Digit buttons : Direct input selection.
7
Picture controls : Use these buttons to obtain the desired
level (see also 'Controlling') for each picture function.
8
TEXT : When adjusting one of the image controls during a
meeting, the displayed bar scale can be removed by press-
ing 'TEXT' key first. To re-display the bar scale on the
screen, press 'TEXT' key again. 'TEXT' key is only active in
operational mode. When 'TEXT' is off, no warning message
will be displayed.
Control disk : To make menu selections when in the
11
adjustment mode. Also allows to increment or decrement an
adjustment in the adjustment mode.
Control disk up = up arrow in the menus
Control disk down = down arrow in the menus
Control disk to the right = arrow to the right on the menus
Control disk to the left = arrow to the left on the menus
RC operating indication : lights up when a button on the
12
remote control is pressed. (This is a visual indicator to check
the operation of the remote control)
5975597 BARCODATA 808S 110397