Connecting To The Remoteye Ii Via Telnet; Remoteye Ii Telnet Menu Navigation - Toshiba RemoteEye II User Manual

Connecting to the RemotEye II via Telnet

A telnet configuration session can be established once the hardware and software are
prepared. Follow these steps to begin configuration:
1. Type telnet followed by the IP address of RemotEye II at a Unix console or
a DOS prompt.
2. Press [Enter].
3. Key in the password (default is public) when prompted.
For more information on using telnet, please refer to telnet application Windows help
file or Unix man page.
The RemotEye II will only accept 2 telnet clients simultaneously. The telnet
connection will time-out after 60 seconds of inactivity.

RemotEye II Telnet Menu Navigation

The configuration menus for telnet configuration are identical to those presented by a
direct configuration session.
configuration menus of RemotEye II.
44
Refer to page 26 for detailed guidance through