Making The Network Connection - Toshiba RemoteEye II User Manual

Making the Network Connection

Each Ethernet network is different. Therefore, the following steps should be used as
an outline for connecting the RemotEye II to a network:
1. Connect one end of a Category 5 cable to the NETWORK RJ45 receptacle of
RemotEye II.
2. Connect the other end of the Category 5 cable to a designated network switch
or hub. A network administrator will allocate an available port.
3. Verify a network link has been established. On RemotEye II/External,
confirm Traffic LED on RemotEye II is illuminated.
II/Internal, confirm the leftmost, green LED is illuminated.
20
On RemotEye