Toshiba RemoteEye II User Manual page 116

Toshiba UPS Power Management
RemotEye II can help further protect critical load systems connected to a UPS by
initiating automated shutdowns on that equipment.
servers upon detection of three UPS events; Input power failure, low battery, and
overload. Also, RemotEye II can be used to coordinate automatic system shutdowns
during weekends or holidays.
RemotEye II can be used in conjunction with a UPS to manage power to UPS loads.
Set UPS to Output Shutdown Mode After Delay
Administrators can issue an output shutdown to Toshiba UPS via RemotEye II in any
cases. To issue an output shutdown command, go to UPS Control in the UPS
Management menu. Login as an administrator. Select the radio button beside Set UPS
to Output Shutdown Mode After Delay and click the Apply button.
Scenario:
UPS Output Shutdown Delay (sec ):
Set UPS to Output Shutdown Mode After Delay:
INVERTER
OUTPUT
SHUTDOWN
116
This section highlights the manners in which
22 : 20 : 00 22 : 23 : 00
RemotEye II can shutdown
180(default)
22:20:00