Toshiba RemoteEye II User Manual page 88

Configuring the Trap Receiver
The trap handler of a Manager application varies between software developers. For
specific information about a trap handler, consult the Manager software
documentation.
Understanding RemotEye II Specific Traps
The RemotEye II offers four specific traps. The traps provided are outlined below:
Specific 1: Sent initially when the UPS enters the Battery Backup mode. Persists at 60
second intervals thereafter.
Specific 2: Sent after a UPS test has completed.
Specific 3: Sent whenever a UPS alarm condition has been added to the RemotEye II
alarm table.
Specific 4: Sent whenever a UPS alarm condition has been removed from the
RemotEye II alarm table.
Definition of RemotEye II Trap Attributes
Each specific trap contains additional information called attributes. The number and
the information available differ for each specific trap.
The number of attributes available for each trap is shown below:
Specific Number
1
2
3
4
88
Description
UPS On Battery
UPS Test Completed
UPS Alarm Added
UPS Alarm Removed
Number of Available
Attributes
3
3
2
2