Toshiba RemoteEye II User Manual page 130

Upgrading RemotEye II Firmware from Windows via Serial
Figure 29: Tugrade, RemotEye II Upgrade Utility via Serial
The RemotEye II firmware may be upgraded from a Windows platform by performing
the following procedure.
A PC with a Windows 95/98,2000, or NT operating system installed will be required
for this procedure.
On the PC, create a directory named Upgrade and copy the contents of the RemotEye
II Upgrade CD-ROM to the Upgrade directory.
From the Control Group menu, set the TFTP Upgrade Control to Enabled.
For serial upgrade, ensure that DIP switch 1 is on, DIP switch 2 is off.
From the command prompt (where Tupgrade is saved to), type Tupgrade -S and a
dialog box will be displayed.
Click Discover to search for the RemotEye II on the network.
Select the RemotEye II to be upgraded and enter the password.
Click Open to load the upgrade file.
Path to the upgrade file and select the latest version.
Click Upgrade to transfer the file to the upgradeable read-only memory of the
RemotEye II.
130