Advanced - Nexcom NDiS 127 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunc-
tion.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Magic Control Chipset
Legacy OpROM Support
Launch PXE OpROM
Launch Storage OpROM
PCI Subsystem Setting
ACPI Settings
S5 RTC Wake Settings
CPU Configuration
USB Configuration
Super IO Configuration
H/W Monitor
Version 2.10.1208 Copyright (C) 2010 American Megatrends, Inc.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Security Save & Exit
Enable or Disable Boot
[Disabled] Option for Legacy Network
Devices.
[Enabled]
← → Select Screen
↑↓ Select Item
+ - Change Opt.
F1 General Help
F7 Previous Values
F10 Save and Exit
ESC Exit
Launch PXE OpROM
This section is used to enable or disable boot option for legacy network
devices.
Launch Storage OpROM
This section is used to enable or disable boot option for legacy storage
devices.
PCI Sub System Setting
This section is used to configure PCI, PCI-X and PCI Express settings.
ACPI Settings
Enables or disables the System ACPI parameters.
S5 RTC Wake Settings
This section is used to Enables or disables system to wake from S5 state
using RTC alarm.
CPU Configuration
This section is used to view detailed CPU specifications and configure the
CPU.
USB Configuration
This section is used to enable or disable the USB controller.
37
NDiS 127 User Manual