Installing A Sata Hard Drive - Nexcom NDiS 127 User Manual

Chapter 3: System Setup

Installing a SATA Hard Drive

1. The drive bracket included in the chassis is used to hold a SATA hard
drive. Disassembly HDD bracket from system to install SATA Hard Drive.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
2. Place and slide the SATA hard drive onto the drive bracket. Align
the mounting holes that are on the sides of the SATA drive with the
mounting holes on the drive bracket.
Mounting
Screw Holes
23
NDiS 127 User Manual