Advanced - Nexcom NDiS 111 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunction.
Aptio Setup Utility -
(C)Copyright 2010, American Megatrends, Inc.
Main Advanced Chipset
Legacy OpROM Support
Launch PXE OpROM [Disabled]
Launch Storage OpROM [Enabled]
CPU Configuration

GPIO Configuration

Wake On Lan Configuration

Wake On Ring Configuration

USB Configuration

SDIO Configuration

Super IO Configuration

H/W Monitor

Version 2.10.1208. (C)Copyright 2010, American Megatrends, Inc.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Security Save & Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
Select a fild.
Use [+] or [-] to
configure system Time.
Select Screen
← →
Select Item
↑↓
+ - Change Field
Tab Select Field
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Launch PXE OpROM
This section is used to enable or disable boot option for legacy network
devices.
Launch Storage OpROM
This section is used toenable or disable boot option for legacy storage
devices.
CPU Configuration
This section is used to view detailed CPU specifications and configure the
CPU.
Wake On Lan/Ring Configuration
This section is used to configure Wake on Ring / Lan settings.
USB Configuration
This section is used to enable or disable the USB controller.
SDIO Configuration
This section is used to configure the Super IO device.
Super IO Configuration
This section is used to configure the Super IO device.
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
19
NDiS 111 User Manual