S5 Rtc Wake Settings - Nexcom NDiS 127 User Manual

Chapter 4: BIOS Setup

S5 RTC Wake Settings

This section is used to Enables or disables system to wake from S5 state
using RTC alarm.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
Wake system with Fixed Time
Wake system with Dynamic Time
Version 2.10.1208 Copyright (C) 2010 American Megatrends, Inc.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
[Disabled]
Select the highest ACPI sleep
state the system will enter
[Disabled]
when the SUSPEND button
is pressed.
← → Select Screen
↑↓ Select Item
+ -
Change Opt.
F1 General Help
F7 Previous Values
F10 Save and Exit
ESC Exit
Wake system with Fixed Time
This section is used to enable or disable system wake on alarm event.
When enabled, system will wake on the HR:MIN:SEC specified .
Wake system with Dynamic Time
This section is used to enable or disable system wake on alarm event.
When enabled, system will wake on thecurrent time + Increase minute(s).
41
NDiS 127 User Manual