Exit - Nexcom NDiS 127 User Manual

Chapter 4: BIOS Setup

Exit

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Chipset
Main Advanced Magic Control
Save Changes and Exit
Discard Change and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
SATA: WDC WD1600BEVT-00A23T0
Launch EFI Shell form filesystem device
Version 2.10.1208 Copyright (C) 2010 American Megatrends, Inc.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Security
Save & Exit
Attempts to launch EFI Shell
application (Shellx64.efi)
from one of the available
file system devices.
← → Select Screen
↑↓ Select Item
+ -
Change Opt.
F1 General Help
F7 Previous Values
F10 Save and Exit
ESC Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then
press<Enter>. A dialog box will appear. Confirm by selecting Yes. You can
also press <F10> to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.
Save Changes and Reset
Reset the system after saving changes.
Discard Changes and Reset
Reset system setup without saving any changes.
Save Changes
To save the changes, select this field then press <Enter>. A dialog box will
appear. Confirm by selecting Yes to save all changes made.
Discard Changes
To discard the changes, select this field then press <Enter>. A dialog box
will appear. Confirm by selecting Yes to discard all changes made and
restore the previously saved settings.
Restore Defaults
Restore / Load the default values from the BIOS ROM.
Launch EFI Shell from filesystem device
Attempts to launch EFI Shell application (Shellx64.efi)from one of the avail-
able file system devices.
53
NDiS 127 User Manual