Table of Contents
Advertisement
( 10 )
Returning to factory settings
The contents set of each scene file can be returned to the factory default status (preset status).
pattern and character display.
(4) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for
approx. 1 second.
* Only the scene files selected presently are set at the time of shipment from the factory. If you wish to have all
the scene files set as the factory shipment setting, perform the above operation for each scene file.
7. 3
External Sync
When using the unit with an external sync signal, input the external sync signal to EXT. SYNC terminal on the rear
panel.
When the external sync signal is input, the camera automatically switches its sync from the internal sync to the
external sync.
( 1 )
External sync signal input conditions
SYNC (75Ω unbalanced)
( 2 )
External sync frequency range
1080p/59.94Hz Setting
1080p/50Hz Setting
1080i/59.94Hz Setting
1080i/50Hz Setting
( 3 )
Using the unit with external sync signal
Adjust H (Horizontal) phase if necessary to match the output of multiple cameras.
When adjusting H (Horizontal) phase, refer to the item "7.2 (7) SYNC".
(3. 1)
H (Horizontal) phase adjustment
Observe the external sync signal and the video signal output waveform of the unit
with a dual trace oscilloscope, and adjust H phase so that the H phases match.
7. 4
Synchro. Scan Operation
The shutter speed can be set by the horizontal scanning period (1H).
( 1 )
Setting by 1H
1/1125H to 1122/1125H stands for the setting by the 1H and the shutter speed can be set by the 1H.
Match
the phase.
31
External
Sync. signal
Camera
Sync. output
Advertisement
Table of Contents
