Scene File - Toshiba IK-HD3D Instruction Manual

AWB (Automatic white balance)
Perform the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item "7.2 (3) WHT BAL (White Balance)".)
3200K : Appropriate for indoor shooting.
5600K : Appropriate for outdoor shooting.
to disable the color bar pattern or the character display on the menu.
Display
Automatic white balance adjustment finished correctly.
Automatic white balance adjustment cannot be performed because the video level is too low.
Adjust the video level by increasing the illumination or opening the lens iris.
Automatic white balance adjustment cannot be performed because the video level is too high.
LEVEL HIGH Adjust the video level by decreasing the illumination or closing the lens iris.
Automatic white balance adjustment cannot be performed because the color temperature is
too low.
If the C.TEMP is set to 5600K, set to 3200K.
If the message appears with the C.TEMP set to 3200K, change the illumination or use a color
temperature conversion filter.
Automatic white balance adjustment cannot be performed because the color temperature is
C. TEMP HIGH too high.
If the C.TEMP is set to 3200K, set to 5600K.
If the message appears with the C.TEMP set to 5600K, change the illumination or use the color
temperature convearsion filter.
Automatic white balance adjustment cannot be performed for other reasons. Such as no white
area is included in an object, etc.
MANUAL (Manual white balance)
(Refer to the item "7.2 (3) WHT BAL (White Balance)".)
confirming with a monitor or a vector scope.
(Refer to the item "7.2 (3) (3.2) Changing gain in MANUAL mode".)
6. 3

Scene File

while the position is displayed, the scene file cycles as described above.
Note:
Refer to the item "7.2 (8) Menus" for the contents that can be set in OPTION.
FILE A FILE B FILE C
12
Meaning
FILE D FILE E