4 ) Process1; (4. 1) Changing Gamma Correction On/Off; (4. 2) Changing Gamma Correction Level; (4. 3) Changing Black Gamma Correction Level - Toshiba IK-HD3D Instruction Manual

( 4 ) PROCESS1
Move up and down by
pushing MENU UP, DOWN
-- 4 PROCESS1 --
GAMMA ON/OFF
GAMMA
BLACK GAMMA NORMAL
M PED
R PED
B PED
WHT CLIP
(4. 1) Changing gamma correction ON/OFF
Move the "
When ON is selected, menu will show the GAMMA and BLACK GAMMA selections. When OFF is selected,
GAMMA and BLACK GAMMA are not displayed. So the setting for GAMMA and BLACK GAMMA cannot be made.
Move up and down by
pushing MENU UP, DOWN
-- 4 PROCESS1 --
GAMMA ON/OFF
M PED
R PED
B PED
WHT CLIP
Menu when GAMMA OFF is selected.
(4. 2) Changing gamma correction level
Move the "
Correction amount becomes smaller.
(4. 3) Changing black gamma correction level
Move the "
[DATA UP]
LOW NORMAL HIGH
[DATA DOWN]
automatically. So the black gamma correction level change cannot be changed.
Select the desired value by
pushing DATA UP, DOWN
(FILE A)
ON
0
0
0
0
109%
Select the desired value by
pushing DATA UP, DOWN
(FILE A)
OFF
0
0
0
109%
-10
Gamma correction ON, OFF
Gamma correction level setting -10 to 10
Black gamma correction setting LOW, NORMAL, HIGH
Master pedestal setting -200 to 200
Red pedestal setting -100 to 100
Blue pedestal setting -100 to 100
White clip 100 to 109%
Gamma correction ON, OFF
Master pedestal setting -200 to 200
Red pedestal setting -100 to 100
Blue pedestal setting -100 to 100
White clip 100 to 109%
Correction amount becomes larger.
0 10
23