Table of Contents
Advertisement
6.
OPERATION
A camera head needs to be connected to this camera control unit from this section on.
Refer to the item "5. CONNECTION", connect the equipment correctly.
Turn on the connected equipment and the camera.
When using the camera for the first time and when replacing the camera head, be sure to perform the ABB
adjustment, refer to the item "6.1 Automatic Black Balance".
Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc.
Refer to the item "6.2 White Balance", make the adjustment.
necessary items.
6. 1
Automatic Black Balance
Black balance adjustment is necessary to get the correct black picture level.
disable the color bar pattern or the character display.
approx. 1 second.
Display
ABB OK
Automatic black balance adjustment finished correctly.
ABB NG
Automatic black balance adjustment cannot be performed because the lens iris is open. Close
CLOSE LENS
the lens iris.
ABB NG
Automatic black balance adjustment cannot be performed.
Operate the automatic black balance again.
6. 2
For white balance adjustment of this unit, AWB (Automatic White Balance) and MANUAL (Manual white balance)
Outline
Adjust white balance by displaying a white object
inside the area set by AWB menu and holding the
Features Automatically adjusts red and blue balance based
on green for the object in the designated area .
Note
When no white object exits in the designated area
or lighting is too blight or too dark, AWB NG is
displayed and automatic white balance adjustment
can not be performed.
Meaning
Adjust the white balance manually using the WHT
BAL menu while shooting a white object.
White balance can be set manually.
Adjustment is performed by confirming with a
monitor etc.
11
MANUAL
Advertisement
Table of Contents
