The following table describes common MTU sizes and applications.
Table 3. Common MTU sizes
MTU
Application
1500
The largest Ethernet packet size. This value is the typical setting for non-PPPoE,
non-VPN connections, and is the default value for NETGEAR routers, adapters, and
switches.
1492
Used in PPPoE environments.
1472
Maximum size to use for pinging. (Larger packets are fragmented.)
1468
Used in some DHCP environments.
1460
Usable by AOL if you do not have large email attachments, for example.
1436
Used in PPTP environments or with VPN.
1400
Maximum size for AOL DSL.
576
Typical value to connect to dial-up ISPs.
To change the MTU size:
1.
Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
2.
In the MTU Size field, enter a new size from 64 through 1500.
3.
Click the Apply button.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to
function as a DHCP server. The router's default LAN IP configuration is:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires the use of a different IP
addressing scheme, change the LAN Setup screen.
N450 Wireless Router WNR2500
genie ADVANCED Home
50