Table of Contents
Advertisement
Router Information Pane
To display the Router Information pane:
Click the ADVANCED tab.
The Router Status screen displays. The Router Information pane is located in the upper left of
the screen.
The following information displays:
•
Hardware Version. The router model.
•
Firmware Version. The version of the router firmware. It changes if you upgrade the
router firmware.
•
GUI Language Version. The localized language of the router user interface.
•
Operation Mode. The mode in which the router operates:
-
Router. The router functions in default mode.
-
AP. The router functions as an access point only.
•
LAN Port.
-
MAC Address. The Media Access Control address for the LAN port. This address is
the unique physical address that the Ethernet (LAN) port of the router uses.
-
IP Address. The IP address that the Ethernet (LAN) port of the router uses. The
default is 192.168.1.1.
-
DHCP Server. Identifies whether the router's built-in DHCP server is active for the
LAN-attached devices.
Internet Port Pane
To display the Internet Port pane:
Click the ADVANCED tab.
The Router Status screen displays. The Internet Port pane is located in the upper right of the
screen.
The following information displays:
•
MAC Address. The Media Access Control (MAC) address for the Internet port. This
address is the unique physical address that the Internet (WAN) port of the router uses.
•
IP Address. The IP address that the Internet (WAN) port of the router uses. If no address
is shown or the address is 0.0.0.0, the router is not connected to the Internet.
•
Connection. Shows whether the router is using a fixed or dynamic IP address on the
Internet port. If the value is DHCP, the router obtains an IP address dynamically from the
ISP or from a DHCP server on your LAN.
•
IP Subnet Mask. The IP subnet mask that the Internet port of the router uses.
N450 Wireless Router WNR2500
Monitoring
118
Advertisement
Table of Contents
