Table of Contents
Advertisement
A screen similar to the following displays:
2.
Select the Use a Dynamic DNS Service check box.
3.
Select the URL of your Dynamic DNS service provider.
4.
Type the host name (or domain name) that your Dynamic DNS service provider gave you.
5.
Type the user name for your Dynamic DNS account.
This name is the name that you use to log in to your account, not your host name.
6.
Type the password (or key) for your Dynamic DNS account.
7.
Click the Apply button.
8.
To verify the Dynamic DNS status, click the Show Status button.
Static Routes
Static routes provide more routing information to your router. Under usual circumstances, the
router has adequate routing information after it has been configured for Internet access, and
you do not need to configure more static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets on your network.
As an example of when a static route is needed, consider the following case:
•
Your primary Internet access is through a cable modem to an ISP.
•
You have an ISDN router on your home network for connecting to the company where
you are employed. This router's address on your LAN is 192.168.1.100.
N450 Wireless Router WNR2500
Advanced Settings
98
Advertisement
Table of Contents
