Cable Your Router - NETGEAR N450 WNR2500 User Manual

Cable Your Router

The installation guide that came in the box has a cabling diagram on the first page. This
section describes how to connect the router, the computer, and the cable or DSL broadband
modem, and provides detailed illustrations.
1. Unplug and turn off the cable or DSL broadband modem.
2. If your modem has a backup battery, remove it.
3. Locate the Ethernet cable (
4. Disconnect the cable from the modem (
You connect it to the router later.
N450 Wireless Router WNR2500
) that connects your computer to the modem.
1
1
2
).
2
Hardware Setup
14