Table of Contents
Advertisement
A screen similar to the following displays:
The Wired Devices and Wireless Devices tables show the following information:
•
# (number). The order in which the device joined the network.
•
Device Name. If the device name is known, it is shown here.
•
IP Address. The IP address that the router assigned to this device when it joined the
network. This number can change when a device is disconnected and rejoins the
network.
•
MAC Address. The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
•
Connection Type. The type of connection of the attached device.
2.
To make sure that all of the attached devices are authorized, examine the devices carefully.
To increase security, enable access control. For more information, see
Control
on page 35.
3.
(Optional) Click the Refresh button.
The information that is displayed is updated.
Set Up Access Control
To allow or block computers and other electronic devices from accessing your network, use
access control. When a device is blocked, it can only get an IP address from your router, but
it cannot communicate with other devices on your network, nor can it connect to the Internet
through your router.
N450 Wireless Router WNR2500
genie BASIC Settings
35
Set Up Access
Advertisement
Table of Contents
