Set Up The Wps Settings - NETGEAR N450 WNR2500 User Manual

N450 wireless router
Hide thumbs Also See for N450 WNR2500:
Table of Contents

Advertisement

5.
To activate the schedule, select the Turn off wireless signal by schedule check box.
6.
Click the Apply button.

Set Up the WPS Settings

You can control how WPS functions on the router. NETGEAR recommends that you use
caution when changing the WPS settings.
Note:
For information about how to use WPS to add wireless devices and
other equipment to your wireless network, see
Setup Method
You cannot set up the WPS settings when the security is WEP. Make sure that the security
mode is WPA-PSK, WPA2-PSK, or WPA-PSK + WPA2-PSK mixed mode. For information
about configuring the security mode, see
You can do the following with the router's PIN:
Disable the PIN entirely.
Change the number of times that a PIN connection is allowed to fail before the PIN is
automatically disabled. By default, the PIN is automatically disabled after three failed
connection attempts. If the PIN is automatically disabled, it remains so until you restart
the router. While the PIN is disabled, the WPS LED blinks slowly.
Turn off automatic disabling of the PIN.
To change the WPS settings for your wireless network:
1.
Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
The router's PIN is shown for information only. You cannot change it.
2.
To disable the router's PIN entirely, clear the Enable Router's PIN check box.
By default, the PIN is enabled, but there might be situations in which you want to disable
the PIN.
3.
To change the number of times that a PIN connection can fail, under the Enable Router's
PIN check box, type a number in the field.
You can change this setting only when the PIN is enabled. By default, the number is 3.
4.
To turn off automatic disabling of the PIN, clear the check box under the Enable Router's
PIN check box.
You can change this setting only when the PIN is enabled. By default, automatic disabling
of the PIN is turned on.
5.
Clear the Keep Existing Wireless Settings check box.
N450 Wireless Router WNR2500
on page 24.
Basic Wireless Settings
Advanced Settings
80
Wi-Fi Protected
on page 28.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wnr2500

Table of Contents