Troubleshoot A Pppoe Internet Connection; Changes Not Saved - NETGEAR N450 WNR2500 User Manual

N450 wireless router
Hide thumbs Also See for N450 WNR2500:
Table of Contents

Advertisement

two DNS servers for your use. If you entered a DNS address during the router's
configuration, reboot your computer, and verify the DNS address. You can configure your
computer manually with DNS addresses, as explained in your operating system
documentation.
Your computer might not have the router configured as its TCP/IP gateway.
If your computer obtains its information from the router by DHCP, reboot the computer,
and verify the gateway address.
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you no
longer need to run that software after installing your router. If you use Internet Explorer as
your browser, you might need to select Tools > Internet Options, click the Connections
tab, and select the Never dial a connection check box. Other browsers have similar
options.

Troubleshoot a PPPoE Internet Connection

To troubleshoot a PPPoE Internet connection:
1.
Start your browser and select an external site such as http://www.netgear.com.
2.
Access the router user interface at http://www.routerlogin.net.
3.
Click the ADVANCED tab.
The Router Status screen displays.
4.
On the Internet Port pane, click the Connection Status button.
For more information, see
information, including valid IP addresses, your PPPoE connection is up and working.
If any of the fields show incomplete information, or no valid IP address, you can attempt
to reconnect by clicking the Connect button. The router continues to attempt to connect
indefinitely.
If you cannot connect after several minutes, you might be using an incorrect service name,
user name, or password. There might also be a provisioning problem with your ISP.
Note:
Unless you connect manually, the router does not authenticate using
PPPoE until data is transmitted to the network.

Changes Not Saved

If the router does not save the changes you make through the NETGEAR genie screens,
check the following:
N450 Wireless Router WNR2500
Connection Status
on page 120. If the fields show valid
Troubleshooting
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wnr2500

Table of Contents