Table of Contents
Advertisement
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings button on the back panel of
the router for at least seven seconds. The router resets, and returns to the factory settings
that are shown in the following table.
Table 4. WNR2500 router factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet
WAN MAC address
connection
WAN MTU size
Port speed
Local area
LAN IP
network (LAN)
Subnet mask
DHCP server
DHCP range
Time zone
Time zone adjusted for daylight
saving time
Wireless
Wireless communication
SSID name
Network key (password)
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
N450 Wireless Router WNR2500
Default behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
United States is Pacific Time; otherwise, varies by region
Disabled
Enabled
Preset. For information, see the router label. (For a
description of the router label, see
Enabled
Auto
Note:
Maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput varies.
Network conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead lower actual data
throughput rate.
United States in the US; otherwise, varies by region
Auto
Up to 450 Mbps
Supplemental Information
134
Label
on page 12.)
Advertisement
Table of Contents
