Table of Contents
Advertisement
If your router is the base station, it can function as the "parent" for up to four other access
points.
6.
Click the Apply button.
Set Up a Repeater
To set up the repeater to avoid conflicts with the wireless connection to the base station, use
a wired Ethernet connection.
Note:
If you set up your router as a base station with a non-NETGEAR
access point as the repeater, you might need to change more
configuration settings. In particular, you should disable the DHCP
server function on the access point that functions as the repeater.
To configure the router as a repeater:
1.
Select ADVANCED > Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays. The wireless MAC address of the
router displays onscreen.
2.
Select the Enable Wireless Repeating Function check box.
3.
Select the Wireless Repeater radio button.
4.
Complete the Repeater IP Address field.
N450 Wireless Router WNR2500
Advanced Settings
85
Advertisement
Table of Contents
