Using The Lan Ip Setup Options; Configuring Lan Tcp/Ip Setup Parameters - NETGEAR RangeMax WPN824 Reference Manual
Hide thumbs
Also See for RangeMax WPN824:
- Reference manual (174 pages) ,
- Setup manual (38 pages) ,
- Product data (2 pages)
Table of Contents
Advertisement
Reference Manual for the RangeMax Wireless Router WPN824
Using the LAN IP Setup Options
Another category under the Advanced heading is LAN IP Setup. This menu allows configuration
of LAN IP services such as DHCP and RIP. From the main menu of the browser interface, under
Advanced, click LAN IP Setup to view the LAN IP Setup menu, shown below.
Figure 8-9
Configuring LAN TCP/IP Setup Parameters
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act.as a
DHCP server. The router's default LAN IP configuration is:
•
LAN IP address—192.168.1.1
•
Subnet mask—255.255.255.0
These addresses are part of the IETF-designated private address range for use in private networks,
and should be suitable for most applications. If your network has a requirement to use a different
IP addressing scheme, you can make those changes in this menu.
The LAN IP parameters are:
•
IP Address—the LAN IP address of the router.
8-14
v1.0, November 2005
Advanced Configuration of the Router
Advertisement
Table of Contents
Troubleshooting
