To set up access control:
1.
Select BASIC > Attached Devices.
2.
To go to the Access Control screen, click the Access Control link.
A screen similar to the following displays:
3.
Select the Turn on Access Control check box and click the Apply button.
A screen similar to the following displays:
The Access Rule radio buttons and the Allow and Block buttons become active.
Selecting the Turn on Access Control check box lets you block or allow computers or
electronic devices from accessing your network. You must select this check box before
you can specify an access rule and use the Allow and Block buttons. When this check
N450 Wireless Router WNR2500
genie BASIC Settings
36