Setup Menu - NETGEAR N300 User Manual

• To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The modem router attempts to add the WPS-capable device. The WPS LED
front of the modem router blinks green. When the modem router establishes a WPS
connection, the LED is solid green, and the modem router WPS screen displays a
confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.

Setup Menu

Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. Go to the same Internet Setup screen that you can access from the
dashboard on the Basic Home screen. See
• Wireless Setup. Go to the same Wireless Settings screen that you can access from the
dashboard on the Basic Home screen. See
• Guest Network. This selection is a shortcut to the same Guest Network screen that you
can access from the dashboard on the Basic Home screen. See
page 36.
• WAN Setup. Internet (WAN) setup. See
• LAN Setup. Local area network (LAN) setup. See
• QoS Setup. Quality of Service (QoS) setup. See
page 48.
N300 Wireless ADSL2+ Modem Router DGN2200v3
NETGEAR genie Advanced Home
41
Internet Setup on page 26.
Basic Wireless Settings
WAN Setup on page 42.
LAN Setup on page 45.
Quality of Service (QoS) Setup
on the
on page 33.
Guest Networks on
on