Appendix B Vpn Configuration; Configuration Profile - NETGEAR N300 User Manual

VPN Configuration
B.
I PS ec V P N tu n nel
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DGN2200v3 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).

Configuration Profile

The configuration in this appendix follows the addressing and configuration mechanics
defined by the VPN Consortium. Gather necessary information before you begin
configuration. Verify that the firmware is up to date, and that you have all the addresses and
parameters to be set on both sides. Check that there are no firewall restrictions.
Table 10.
VPN Consortium Scenario
Type of VPN
Security scheme:
IP addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B
10.506.0/24
LAN IP
10.5.6.1
Figure 15. VPNC Example, Network Interface Addressing
Scenario 1 (Identity Using Preshared Secrets)
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
IKE with preshared secret/key (not certificate based)
Static IP address
Static IP address
Gateway A
(DGN2200)
WAN IP
14.15.16.17
Internet
WAN IP
22.23.24.25
146
B
172.23.9.0/24
Gateway B
LAN IP
172.23.9.1