Monitoring The Vpn Tunnel - NETGEAR N300 User Manual

To perform a ping test using this example, start from the remote PC:
a. Establish an Internet connection from the PC.
b. On the Windows taskbar, click the Start button, and then select Run.
c. Type ping -t 192.168.0.1, and then click OK.
This causes a continuous ping to be sent to the VPN router. Within 2 minutes, the ping
response should change from timed out to reply.
Once the connection is established, you can open the browser on the PC and enter the LAN
IP address of the VPN router. After a short wait, you should see the login screen of the VPN
router (unless another PC already has the VPN router management interface open).
Note: You can use the VPN router diagnostics to test the VPN connection
from the VPN router to the client PC. To do this, select Diagnostics
on the modem router main menu.

Monitoring the VPN Tunnel

To view information about the progress and status of the VPN client connection, open the Log
Viewer. In Windows, click Start, and select Programs > N300 Wireless ADSL2+ Modem
Router DGN2200v3 > Log Viewer.
Note: Use the active VPN tunnel information and pings to determine
whether a failed connection is due to the VPN tunnel or some
reason outside the VPN tunnel.
N300 Wireless ADSL2+ Modem Router DGN2200v3
VPN Configuration
161