NETGEAR N300 User Manual page 119

N300 Wireless ADSL2+ Modem Router DGN2200v3
5. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
The Step 3 screen displays.
6. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and click Next.
7. Specify the local LAN address and subnet mask, and click Next.
The VPN Wizard Summary screen displays:
To view the VPNC-recommended authentication and encryption settings used by the
VPN Wizard, click the here link.
8. Click Done on the Summary screen.
Virtual Private Networking
119