To use the push button method, either click the WPS button on this screen or press
•
the WPS button on the side of the router. Within 2 minutes, go to the wireless client
and press its WPS button to join the network without entering a password.
To use the PIN method, select the PIN Number radio button, enter the client security
•
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device.
Repeat Step 2 and Step 3 to add another WPS client to your network.
4.
Setup Menu
To display the Setup menu:
Select Advanced > Setup to display the Setup menu.
The following selections are available:
Internet Setup. Go to the same Internet Setup screen that you can access from the
•
dashboard on the Basic Home screen. See
Wireless Setup. Go to the same Wireless Settings screen that you can access from
•
the dashboard on the Basic Home screen. See
Guest Network. This is a shortcut to the same Guest Network screen that you can
•
access from the dashboard on the Basic Home screen. See
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup. Quality of Service (QoS) setup. See
•
page 40.
WAN Setup
The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the
Maximum Transmit Unit (MTU) size, and enable the router to respond to a ping on the WAN
(Internet) port.
N150 2-Port Wireless Router WNR612v3
WAN Setup
NETGEAR genie Advanced Home
33
on page 19.
Internet Settings
Basic Wireless Settings
FastLane
on page 33.
on page 37.
LAN Setup
Quality of Service (QoS) Setup
on page 24.
on page 29.
on