Example Of Using Auto Policy - NETGEAR N300 User Manual

Example of Using Auto Policy

IP: 192.168.0.1
14.15.16.17
Gateway A
Figure 13. Auto Policy for a Gateway-to-Gateway tunnel
The following settings are assumed for this example:.
Table 8. Gateway-to-Gateway VPN Tunnel Configuration Worksheet
Parameter
Connection Name
Pre-Shared Key
Secure Association
Perfect Forward secrecy
Encryption Protocol
Authentication Protocol
Diffie-Hellman (DH) Group
Key Life in seconds
IKE Life Time in seconds
VPN Endpoint
Gateway_A
Gateway_B
To use Auto Policy:

1. Set the LAN IPs on each modem router to different subnets and configure each correctly
for the Internet.
2. Select Advanced - VPN > VPN Policies and click the Add Auto Policy button.
N300 Wireless ADSL2+ Modem Router DGN2200v3
VPN Tunnel
Value to Be Entered Field Selection
GtoG
12345678
N/A
N/A
N/A
N/A
N/A
28800 (8 hours)
3600 (1 hour)
Local IPSecID LAN IP Address
GW_A 192.168.0.1
GW_B 192.168.3.1
Virtual Private Networking
Internet
N/A
N/A
Main Mode
Enabled
DES
MD5
Group 1
N/A
N/A
Subnet Mask
255.255.255.0
255.255.255.0
129
IP:192.168.3.1
22.23.24.25
Gateway B
Manual Keys
Disabled
3DES
SHA-1
Group 2
FQDN or Gateway
IP (WAN IP Address
14.15.16.17
22.23.24.25