Factory Settings - NETGEAR N300 User Manual

Factory Settings

You can return the modem router to its factory settings. On the bottom of the modem router,
use the end of a paper clip or some other similar object to press and hold the Restore Factory
Settings button
settings. Your device will return to the factory configuration settings shown in the following
table.
Table 9. Factory Default Settings
Feature
Router Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
Local network DHCP starting IP address
(LAN) continued
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
N300 Wireless ADSL2+ Modem Router DGN2200v3
for at least 7 seconds. The modem router resets, and returns to the factory
Supplemental Information
Default Behavior
www.routerlogin.com or /www.routerlogin.net
admin
password
Use default address
1492
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Enabled or disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
143