Platen Calibration - Garland CXBE12 Product Manual

SERVICE MANUAL GARLAND ELECTIC CLAMSHELL BROILER, CXBE12 MODEL

PLATEN CALIBRATION

Select "Calibration instrument size" Enter size of block, select check mark 'For large movement, select "Platen
Position Set Point" 'Enter position for platen to move to - platen moves when the check mark is selected
NOTE: TAKE CARE NOT TO SEND PLATEN TOO FAR. MOVE IN SMALL INCREMENTS TO PREVENT DAMAGE TO
GRATES!
'The up and down arrows can be used to move the platen up or down, one mil per press. 'Select "Apply
Calibration" to lock in calibration setting. 'Select "End Calibration" to exit screen.
This section is in development. Please call Garland Service 855-586-1542 or Regional Service Managers
for the latest information.
Page 38 Part #4532096 Rev 1 (26 June 2013)