Garland CXBE12 Product Manual page 21

GARLAND ELECTIC CLAMSHELL BROILER GRILL, CXBE12 MODEL
5. Use detailing tool to
raise each half of lower
grate. Carefull not to
drop grates while they
been raise.
6. Scrape grate surfaces
that are now exposed,
fi rst with tooth side
of detailing tool,
then with smooth
side. Brush heating
elements and area of
heavy build-up using
broiler brush.
7. Use detailing tool to
lower grate halves
back into a lower
position.
8. Remove frame (skirt)
on each side of lower
broiler. Lift each frame
straight up from the
sides, then tilt until
frame is clear of broiler.
Important Note;
Be careful not to get Kay QSR super contact
cleaner on the grates themselves.
Part #4532096 Rev 1 (26 June 2013)
9. Use Kay QSR super
contact cleaner to
clean stainless steel
edges around upper
and lower grates.
• Wring out clean,
sanitized towel well
and spray with Kay
QSR super contact
cleaner.
• Turn towel over and
wipe surface again to
remove excess cleaner.
CRUMBS COULD STILL BE WARM.
BE AWARE; CRUMBS MUST BE
COOL BEFORE DISCARDING
IN TRASH CAN
10. Remove grease
drawer and crumb
baffl e.
• Slide out grease
drawer.
• Remove crumb baffl e.
• Scrape crumbs from
baffl e and grease
drawer with metal
spatula and discard in
trash can.
11. Rinse crumb baffl e,
grease drawer
and detailing tool
with sprayer at the
compartment sink.
• Remove grease
drawer and empty
into sink.
• Spray grease drawer,
crump baffl e and
scraper with hot water.
SERVICE MANUAL
CAREFUL!
Page 21