Replace All Originals If Restarting Job - Lexmark MX410 User Manual

Troubleshooting

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:
•
Select Cancel job to clear the message and cancel the scan job.
•
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
•
Select Finish job without further scanning to end the last successful scan job.
• Select Restart job to restart the scan job with the same settings from the previous scan job.
•
For non‑touch‑screen printer models, press
Replace cartridge, 0 estimated pages remain [88.xy]
Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.
Replace cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
Printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Notes:
•
The x and y values represent .xy in the code that appears on the printer control panel.
•
The x and y values must match for printing to continue.
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
to confirm.
250