Tray Problems - Lexmark MX410 User Manual

Troubleshooting
Action
Step 2
Check the cable and the ISP connection.
a
Use the correct cable, and then make sure it is securely connected to
the ISP.
b
Check if the ISP solution interface cable is securely connected into the
receptacle of the controller board.
Note: The ISP solution interface cable and the receptacle on the
controller board are color‑coded.
Does the Internal Solutions Port operate correctly?

Tray problems

Action
Step 1
a
Pull out the tray, and then do one or more of the following:
•
Check for paper jams or misfeeds.
•
Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.
•
If you are printing on custom‑size paper, then make sure that the
paper guides rest against the edges of the paper.
•
Make sure the paper is below the maximum paper fill indicator.
•
Make sure paper lies flat in the tray.
b
Check if the tray closes properly.
Is the tray working?
Step 2
a
Turn off the printer, then wait about 10 seconds, and then turn the
printer back on.
b
Resend the print job.
Is the tray working?
Step 3
Check if the tray is installed and recognized by the printer.
Print a menu settings page, and then check if the tray is listed in the
Installed Features list.
Is the tray listed in the menu settings page?
Yes No
The problem is solved. Contact
support.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
Go to step 4. Reinstall the tray. For
more information, see
the setup
documentation that
came with the tray.
258
customer