Page Setup; Scan Preview - Lexmark MX410 User Manual

E-mailing

Page Setup

This option lets you change the following settings:
•
Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper.
This also identifies what needs to be scanned for inclusion in the e-mail.
•
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and
Binding settings to match the orientation.
• Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.
Custom Job
This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is
installed.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned,
the scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
Transmission Log
This option lets you print the transmission log or transmission error log.
Edge Erase
This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area
around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the
area selected, leaving nothing on that portion of the scan.
Advanced Imaging
This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image,
Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e‑mail the
document.
Fix Scan Skew
This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.
102