Printer Is Printing Blank Pages - Lexmark MX410 User Manual

Troubleshooting
Action
Step 4
Make sure that the paper has no texture or rough finishes.
Are you printing on textured or rough paper?
Step 5
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b
Resend the print job.
Is the print still too light?
Step 6
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Is the print still too light?
Step 7
Replace the imaging unit, and then resend the print job.
Is the print still too light?

Printer is printing blank pages

Yes No
From the printer Go to step 5.
control panel, change
the texture settings in
the Paper Texture
menu to match the
paper you are printing
on.
Go to step 6. The problem is solved.
Go to step 7. The problem is solved.
Contact customer The problem is solved.
support.
277