Installing 550-Sheet Trays - Lexmark X925 User Manual

Additional printer setup
9
Insert the bases on the slots at the sides of the printer stand and secure them with screws.
10
Turn the printer back on.
11
Set the printer software to recognize the optional input source.
For more information, see
Installing 550‑sheet trays
Notes:
•
The printer supports a maximum of three optional 550‑sheet trays.
•
When installing three optional 550‑sheet trays, use a printer stand converted into a caster base.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Note: This task requires a screwdriver.
"Updating available options in the printer driver" on page 62.
53